Bellco Bioreactor Vessel 15 Liter 7909-10015 w/ 18 Hole Headplate & Fittings

Description

You are viewing a
Bellco Bioreactor Vessel 15 Liter 7909-10015 w/ 18 Hole Headplate & Fittings
.
This Vessel was surplus from a project and is in very good condtion.  There are a few chips on the edge around the opening but with the Slicon Headplate O-Ring, there is nothing that would at all jeapordize the seal.  Please see the images below.  I took several pictures of this.  The rest of the vessel is in great condition.  I lowered the price on this one to reflect these imperfections.  You will receive everything you see below.  Please go by the photos and ask any questions if you need more information.  The descriptions below are informational from the Bellco website.  If you have any questions please do not hesitate to contact me.  Thank you for viewing my listing!
The Universal 18 Port Headplate sells for over K itself!  I will professionally package this unit to insure safe arrival.
listing Includes:
1 x Bellco Bioreactor Vessel 15 Liter 7909-10015
1 x
Large Flange Headplate Assembly w/ 18 Holes w/ Fittings & Shown in Images Below
2 x Silicone Headplate O-Ring ( One installed and one spare)
Bioreactor Vessel 15L – SKU: 7909-10015
Round bottom bioreactor vessel is manufactured of type 1 class a borosilicate glass. Graduations are 2L to 11L every 500ml. Vessel dimensions are 240mm od x 445mm oah. A full range of accessories are available for this vessel. Total volume: 16.2L. Working volume is 10L at h/d = 1 and 1.2. The minimum working volume is 1.5L.
* Stand not included *
Specifications:
Size: 15L
Universal Headplate w/ 18 Holes Description:
Universal headplates can fit 5L to 36L vessels. Headplates are used with the large flange vessel to seal and to provide ports for access to the interior of the vessel. The 18-port headplate is most used since more components can be fitted into its ports. The impeller is always positioned in the center drive port and a variety of components, probes, harvesting tubes, and thermowells can be added as needed. Headplates and all stainless steel components of the bioreactor systems are electropolished to seal the surface against bacterial contamination that might occur with a rough surface. Includes red silicone o-ring and 200mm t-bolt clamp.
Specifications:
200mm Large Flange Headplate 10-Port
6@ 1/4″ OD
4@ 1/2″ OD
1 Center For Drive Motor
1964-90115 1/4″ Compression Fitting
1964-90120 1/2″ Compression Fitting
1964-90125 5/16″ Compression Fitting (Thermowell)
O-Ring Replacements
A554-30 6 Each
A554-42 4 Each
A554-13 1 Each